Plymoth K-Mesa. 1m
Plymoth K-Mesa is a modern Workbench with Backdraft and built in regulating Damper. 1m Model. Prepared for Extraction Arm.
Dust, fume and gases
Plymoth K-Mesa is a backdraft workbench suitable for all works where dust, fume and gases are a problem. The contaminated air is extracted backwards from the working area so nobody runs the risk of inhaling it.
Funnel-shaped Extraction Openings and regulating Damper.
The extraction is to the back through a backdraft box with vertical funnel-shaped openings. The built in regulating damper makes it possible to adjust the width of the vertical openings from full open to closed. If a Flexi FLB extraction arm is fitted you can divide the total air volume as you want between backdraft and extraction arm. You adjust the regulating damper from the front of the backdraft box.
Extraction Arm.
The extraction can be concentrated to a smaller area of the workbench with a Flexi FLB 1.5m extraction arm. The arm is mounted on top of the backdraft box on a prepared place. If you need to reach outside the workbench Flexi FLB 2m or 3m arm can be fitted. The side panels can be opened for long objects.
Strongly Designed.
Plymoth K-Mesa is strongly designed of 2mm and 3mm steel-sheet. It is as standard powder painted in white. The table height can be adjusted step by step from 800-950mm. Suitable air volume for 1m table is 1300-1700m3/h and for 1.4m 1500-2200m3/h. K-Mesa shall be connected with an external fan and extraction system. Connection diameter is outside 199mm for 1m and 2x199mm for 1.4m.